Skip to main content

Featured

Space Explorers Book 12: Next Adventure

Memunic Space Explorers › Book 12: Memoon and the Biggest Question › Next Adventure Next Adventure This is the last book in the Memunic Space Explorers series, so the next adventure is yours. Book 1 began with a small slip of paper in the Question Jar: Where did everything come from? You now know much more about how people go about answering it. You know what light can tell us, how a stretching space leaves its mark, and how careful honesty about what we do not know is part of the science. Turn back to Book 1 and read it again. Notice how much more you see in it now. Then take out a fresh slip of paper and write your own question. Memoon will keep the jar open for you. ← Sources and Fact-check · Book 12 contents Keep exploring with Memunic Space Explorers Continue with Book 12: Memoon and the Biggest Question , or see all twelve books in the series . Find more Memunic ebooks on MemuniCity .

Space Explorers Book 11: Answers and Explanations

Memunic Space Explorers › Book 11: Memoon and the Laws of Orbits › Answers and Explanations

Answers and Explanations

  1. g = 3.986 × 1014 / (6.771 × 106) squared = 8.69 m/s², about 89 percent of the value at the surface. Gravity is almost as strong as on the ground. The astronauts float because they and the station fall together around Earth, so the floor does not push on them: their apparent weight is zero, not their gravity.
  2. r = 7.371 × 106 m. v = √(3.986 × 1014 / 7.371 × 106) = 7.35 × 103 m/s. T = 2 π r / v = 6.30 × 103 s, about 105 minutes. At 500 km the values were 7.62 km/s and 94.5 min. The higher orbit is slower and takes longer, because gravity is weaker farther out and the path is longer.
  3. a cubed = T squared = 76 squared = 5,776, so a = 17.9 AU (about 18 AU). The law gives the size of the orbit, in AU, which is a distance. The 76 years only go into the calculation.
  4. M = 4 π squared a cubed / (G T squared). a cubed = 8.24 × 1020 m cubed. T = 7.65 × 3,600 = 2.754 × 104 s, T squared = 7.58 × 108 s squared. M = 39.48 × 8.24 × 1020 / (6.674 × 10−11 × 7.58 × 108) = 3.25 × 1022 / 0.0506 = 6.4 × 1023 kg. Phobos is tiny compared with Mars, so the combined mass the formula gives is almost the mass of Mars alone.
  5. K = G M m / (2 r) = 3.986 × 1014 × 10 / (1.4 × 107) = 2.85 × 108 J. U = -2K = -5.69 × 108 J. E = K + U = -2.85 × 108 J. If drag removes energy, E becomes more negative, so r gets smaller: the satellite sinks, and because v = √(G M / r), it moves faster.
  6. Right: Earth is closest to the Sun in early January and moves fastest then (about 30.3 km/s, against 29.3 km/s in July). Wrong: January is winter in the northern hemisphere. The distance changes by only about 3 percent, and the seasons come from the tilt of Earth’s axis.
  7. v is proportional to √(M / R). The factor is √(2 / 0.5) = √(4) = 2, so the escape speed is twice Earth’s, about 22.4 km/s. A rocket’s engines keep adding energy for minutes, so what matters is the energy it has gained by the time they stop, not its speed at lift-off.
  8. A weather satellite must watch the same region all the time, so it uses geostationary orbit: continuous contact, almost no Doppler shift, and a delay of about 0.12 s that does not matter for pictures. It is large enough to carry a bigger transmitter to make up for the weaker signal and the extra launch energy. The CubeSat needs one message a day from a small radio, so a low orbit gives a signal about 5,000 times stronger and a cheaper launch, and the short contact time is acceptable.

Bonus answer. The forward burn adds energy, so the satellite moves onto an ellipse that rises on the far side. At the top it is moving slower than circular speed, and a second push makes the orbit circular at the larger r. Since v = √(G M / r), the larger r means a smaller speed. To catch a satellite ahead, it should first drop to a lower orbit, where it moves faster, and then climb back up at the right moment.

← Space Detective Quiz · Book 11 contents · Orbit Design Sheet →

Keep exploring with Memunic Space Explorers

Continue with Book 11: Memoon and the Laws of Orbits, or see all twelve books in the series. Find more Memunic ebooks on MemuniCity.

Comments

Popular posts from this blog

CA-7 Job Status and Failure Reason Codes

Here are the various status codes that You may see for jobs in the Queue or Logs in CA-7. R-C0002 R-C0003 R-C0099 R-C0255 R-JCLER A-U0002 A-U0004 A-U0015 A-U0043 A-U4095 A-SOC7 A-U4000 Reason Code/Job Status Code explanation: The indication of the job's current disposition. Values and their meanings are: A-Snnnn-- The job has failed with a system abend. A-Unnnn --The job has failed with a user abend. C-Cnnnn --The job has completed successfully and is going through completion processing. E-ARFATT-- An error occurred during the attempt to attach ARF definitions. This can result if the ARFSET specified is not defined. A diagnostic message may have been written to the CA-7 log, the OS console, or to the trailer queue for the job (in which case it can be displayed using LQ,JOB=x,LIST=ALL). E-ARFERR ---The job encountered an error in the ARF processing. Do a LARFQ command for the job to get more specific information. E-SEGERR --The job has been requeued...

Whistling Winds and Waterfalls: 4 Days of Magic in Shillong

Nestled in the clouds, where the scent of pine trees mingles with the rhythm of waterfalls and the tunes of local guitar-strumming youth—Shillong is more than a place. It’s a vibe. If you’ve got 3 nights and 4 days, you’ve got just enough time to fall in love. Here’s how to make the most of it—food, fun, fog and fantastic views included. Day 1: Shillong, We’re Coming for You! You land in Guwahati, barely out of the airport when the hills start calling. You hop into your cab, Spotify on, windows down, and the three-hour ride to Shillong begins. Just when you think it can’t get better, you stop at Umiam Lake —a lake so calm, it looks like someone ironed the water. By evening, you’re sipping hot chai in Laitumkhrah, maybe nibbling on spicy momos or pork jadoh from a roadside stall. You’re checked into your charming hotel ( Tripura Castle if you fancy old-world royalty, Ri Kynjai if you’re into lakeside poetry). The breeze whispers secrets of waterfalls and pine forests. Sleep well, drea...

Installing and Configuring Hadoop on Ubuntu as a Pseudo Distributed Single Node Cluster

Briefly what is psuedo-distributed single node Hadoop cluster: It is a Hadoop distributed cluster having Single Node. All the five daemons (NN,DN,JT,TT,SNN) are running as individual JVM (java process) instances. We will get all distributed features of Hadoop. This mode is used to develop, test, and staging (before production) Map Reduce programs quickly. It writes all the system, daemon and user logs to different files on the cluster To install Hadoop in this mode, we have to modify the hadoop-env.sh, core-site.xml, hdfs-site.xml, mapred-site.xml. hadoop-env.sh contains all the Environment variables which are required for running Hadoop. All the default values are fine, Only we have to modify the JAVA_HOME=“The location of Java Home Directory” Core-site.xml contains all the cluster specific information like io, temp directory, sorting, file system uri etc. Hdfs-site.xml contains all the parameters which are specific to HDFS like name node directory, data node directory...